ETH News

Materials researchers have created a new composite material that combines two incompatible properties: stiff yet with a high damping capacity.

ETH student and top sprinter Géraldine Frey is preparing for her races with an innovative piece of equipment. Developed at ETH Zurich, the Airshield reduces aerodynamic drag, enabling athletes to train at speeds above their normal pace.

ETH researchers have modified certain bacteria with UV light so that they produce more cellulose. The basis for this is a new approach with which the researchers generate thousands of bacterial variants and select those that have developed into the most productive.

Researchers from ETH Zurich and Empa have developed a hydrogel implant that can help prevent endometriosis, a condition that affects a great many women. This innovation also acts as a contraceptive.

A newly developed airshield supports track and field athletes such as Mujinga Kambundji with overspeed training.

A new electrolyte design for lithium metal batteries could significantly boost the range of electric vehicles. Researchers at ETH Zurich have radically reduced the amount of environmentally harmful fluorine required to stabilise these batteries.

Using a special wafer-thin gold membrane, ETH researchers have made it significantly easier to study surfaces. The membrane makes it possible to measure properties of surfaces that are inaccessible to conventional methods.

Researchers at ETH Zurich have shown that quantum states of single electron spins can be controlled by currents of electrons whose spins are evenly aligned. In the future, this method could be used in electronic circuit elements.

Hedan Bai thinks robots should help people and be compostable. She is working on creating robots made of soft materials that can do both.

Cathodic corrosion protection is a widely used technique for protecting steel-based infrastructure from corrosion. ETH researchers have now clarified the detailed mechanisms involved, thereby resolving a controversial issue that had preoccupied the engineering community for decades.

Paolo Ermanni researched novel composite materials at ETH for over a quarter of a century. His enthusiasm for materials was rivalled only by his passion for teaching. He will also go down in ETH history as the first Vice Rector for Continuing Education. To mark his retirement, we take a look back at his storied career.

Researchers at ETH Zurich have developed a protein-based gel that breaks down alcohol in the gastrointestinal tract without harming the body. In the future, people who take the gel could reduce the harmful and intoxicating effects of alcohol.

The electrification of many areas of life is leading to an increased demand for high-performance batteries. Two ETH spin-offs are making waves in this field: while BTRY develops high-performance solid-state batteries, 8inks is working on a new standard for production.

ETH Zurich researchers have recovered the precious metal from electronic waste. Their highly sustainable new method is based on a protein fibril sponge, which the scientists derive from whey, a food industry byproduct.

Wherever hot water flows, limescale is never far away. In households, this is a nuisance; in thermal power stations, it’s an expensive problem. Now researchers at ETH Zurich have found an answer.

At ETH Zurich, there is a room where the sun shines at the touch of a button; one hour it’s noon in the Sahara, the next it’s January in Berlin. Researchers use it to test newly developed building systems, components and materials.

Researchers at ETH Zurich have developed a sensor that utilises energy from sound waves to control electronic devices. This could one day save millions of batteries.

Researchers at ETH Zurich are developing a new method to remove CO₂ from the atmosphere. It involves molecules that become acidic when exposed to light. Their new process requires much less energy than conventional technologies.

Researchers have trained an artificial intelligence to design the structure of so-called metamaterials with desired mechanical properties for a wide range of applications.

Researchers from ETH Zurich, Empa - Swiss Federal Laboratory for Materials Science and Technology, and Stanford have taken snapshots of the crystal structure of perovskite nanocrystals as it was deformed by excited electrons. To their surprise, the deformation straightened out the skewed crystal structure rather than making it more disordered.

Modelled on nature: researchers have developed a new material that replicates the structure responsible for the blue feathers of the North American song bird, among many other birds. It also has other striking advantages.

The ETH Zurich Latsis Prize goes to Professor Inge Herrmann, and the Lopez-Loreta Prize to researcher Alexandre Anthis. The two scientists have been working together for five years to develop new materials and applications for medicine.

For the first time, researchers have succeeded in printing a robotic hand with bones, ligaments and tendons made of different polymers using a new laser scanning technique.

ETH researchers are developing a low-carbon cement with a significantly lower embodied CO₂ content than traditional cement. The Ultra Green Concrete project aims to make low-carbon, high-performance concrete widely accessible.

Using a new 3D printing technique, researchers at ETH Zurich have developed special ceramic structures for a solar reactor. Initial experimental testing show that these structures can boost the production yield of solar fuels.

The start-up Treeless Pack produces cellulose with microorganisms - entirely without wood. The cellulose can be used to produce paper, packaging material or composites for the construction industry in a resource-saving way.

ETH Zurich mourns the death of materials scientist Ueli W. Suter, ETH Professor Emeritus and former Vice President Research. A personal obituary by his long-time colleague Nicholas Spencer, Professor Emeritus of Surface Science and Technology.

Researchers at ETH Zurich have demonstrated the use of a specially coated metal mesh to harvest water from fog and simultaneously remove pollutants. People living in dry but foggy areas should benefit from this technology.

Researchers at ETH Zurich and Empa have developed a patch with a sensor function. It can be used to seal wounds in the abdomen after surgery. The polymer patch warns before the occurrence of dangerous leaks on sutures in the gastrointestinal tract.

Pulmonary surfactant is a special fluid released by cells in the lungs. For premature babies and COVID-19 patients in intensive care, it can mean the difference between life and death. An ETH materials scientist hopes to shed some light on this complex substance.

It is not easy to make batteries cheap, efficient, durable, safe and environmentally friendly at the same time. Researchers at ETH Zurich have now succeeded in uniting all of these characteristics in zinc metal batteries.

Researchers at ETH Zurich have developed an electronic yarn capable of precisely measuring how a person’s body moves. Integrated directly into sportswear or work clothing, the textile sensor predicts the wearer’s exhaustion level during physical exertion.

Researchers at ETH Zurich, Empa and EPFL are developing a 3D-printed insole with integrated sensors that allows the pressure of the sole to be measured in the shoe and thus during any activity. This helps athletes or patients to determine performance and therapy progress.

Researchers at ETH Zurich achieved a shape memory effect for the first time with objects that are only a few nanometers in size. This can be used to manufacture tiny machinery and robotic devices on the nanoscale.

ETH Zurich researchers have developed an extraordinary protection against corrosion after a chance discovery. It glows in places where it is not damaged, repairs itself – and can be reused multiple times.

A special year is soon coming to an end. In 2022, much has been researched, developed and invented at ETH Zurich. ETH News looks back on an eventful past year.

Ukrainian building materials professor Viacheslav Troian left his homeland with his family because of the war. At ETH Zurich, he is researching the role that recycled concrete might play in future reconstruction.

Researchers from ETH Zurich have developed a new transparent gold nanocoating that harnesses sunlight to heat the lenses of glasses, thereby preventing them from fogging in humid conditions. This coating could potentially also be applied to car windshields.

ETH postdoc Olivier Gröninger is improving the drinking water supply for people in rural areas of South America with his Openversum project. This benefits not only the families but also the local economy and the climate

Materials scientists Nicole Kleger and Simona Fehlmann have developed a 3D printing process for creating salt templates that they can fill with other materials. One area of application is the creation of highly porous lightweight metal components. The two Pioneer Fellows are now trying to transfer this process to industry.

Canadian researchers have discovered that they can stick hydrogel plasters to the skin very effectively using ultrasound. ETH Zurich professor Outi Supponen has now explained the underlying mechanism: imploding bubbles that form within the adhesive located between the plaster and the skin anchor the one on the other.

ETH Pioneer Fellow Alexandre Anthis has developed a patch that seals surgical sutures on the intestines or the stomach. The material designed can also detect any leakage at an early stage – thus preventing serious complications.

Colours can be created in surprisingly different ways. And in addition to being pleasing to the eye, colour can also serve a useful purpose.

Researchers from ETH Zurich, the University of Zurich and Empa have developed a new material for an electronic component that can be used in a wider range of applications than its predecessors. Such components will help create electronic circuits that emulate the human brain and that are more efficient at performing machine-learning tasks.

Researchers at PSI and ETH Zurich have observed for the first time how tiny magnets in a special layout align themselves solely as a result of temperature changes. This view into processes that take place within so-called artificial spin ice could play an important role in the development of novel high-performance computers.

ETH Pioneer Fellow Martin Hofmann has developed a method to produce high-quality plant-based meat alternatives. His research on the flow properties of soft materials enables him to imitate the marbling of real steaks.  

A team of ETH researchers led by Athina Anastasaki have succeeded in breaking down plastic into its molecular building blocks and in recovering over 90 percent of them. A first step towards genuine plastic recycling.  

Through its new doctoral programme, the MaP Doctoral School, ETH Zurich plans to train specialists in materials and processes who will work across disciplines to tackle the big challenges of our time, such as climate change, sustainable development and personalised medicine.

ETH researchers are using artificial intelligence to improve quality management in digital production processes. The team has succeeded in halving the proportion of defective products in an experiment with the semiconductor manufacturer Hitachi Energy.

Researchers at ETH Zurich have developed a new photocatalyst made from an aerogel that could enable more efficient hydrogen production. The key is sophisticated pretreatment of the material.

Load-bearing, lightweight and now also recyclable: researchers led by Professor Paolo Ermanni were presented with the Spark Award in recognition of an innovative process for production of sustainable composite materials. ETH Zurich awarded the prize to their promising invention, with this year marking the tenth time the award has been given.

Quantum physics opens our eyes to the holistic nature of reality. Nothing can be observed in isolation – and everything is governed by chance.

ETH Zurich researchers have developed a new type of laminate that changes colour as soon as the material is deformed. This way, the materials researchers can kill two birds with one stone: a lightweight composite material that inspects itself.

Researchers at ETH have managed to produce nanocrystals made of two different metals using an amalgamation process whereby a liquid metal penetrates a solid one. This new and surprisingly intuitive technique makes it possible to produce a vast array of intermetallic nanocrystals with tailored properties for diverse applications. 

As part of the focus projects, mechanical and electrical engineering students have developed solutions for the challenges of the future. In teams, they spent two semesters developing new technical approaches for their respective projects. The “IGNIS” and “e-Sling” teams presented here are just two of this year’s many notable focus projects.

Researchers at ETH Zurich have developed a condenser for countries where water is in short supply. Theirs is the first zero-energy solution for harvesting water from the atmosphere throughout the 24-hour daily cycle. It relies on a self-cooling surface and a special radiation shield.

Athina Anastasaki joined ETH Zurich in 2019. Her research focuses on the next generation of polymers and recycling processes for these. She wants to recover all the starting materials and use them to produce new materials for other applications.

This year Forbes 30 under 30 – Europe named doctoral candidate, Nicole Aegerter to its Manufacturing and Industry list for being the first to efficiently manufacture thermoplastic composites for large, high-volume structures. Her journey reveals how to survive the lows of becoming an inventor.

Chiara Gattinoni, a materials theorist and Marie Curie Fellow at ETH Zurich, uses the “Piz Daint” supercomputer at CSCS to investigate a special class of materials: ferroelectrics. In the future, these materials could constitute the heart of low-energy-consuming, miniaturised data storage in electrical devices. One ferroelectric Gattinoni analysed is, according to her, truly magical.

Researchers at ETH Zurich are developing a new filter membrane that is highly efficient at filtering and inactivating a wide variety of air-borne and water-borne viruses. Made from ecologically sound materials, the membrane has an appropriately good environmental footprint.

Novel nanoparticles developed by researchers at ETH Zurich and Empa detect multi-resistant bacteria hiding in body cells and kill them. The scientists' goal is to develop an antibacterial agent that is effective where conventional antibiotics remain ineffective.

Researchers at ETH Zurich have developed fluorescent polymers whose colour can be easily tuned. Depending on their length, the polymers emit a different colour. Potential applications include biomedicine, security printing and solar energy.

An 80-metre-high skyscraper made of wood is soon to be built in Zug. A pioneering project for which basic research is being carried out in the construction hall on the Hönggerberg.

Microplastic pollution is a serious problem, but blanket bans won’t solve the issue, says Denise Mitrano. We should regulate plastics more precisely to create incentives for both innovation and environmental safety.

Researchers at ETH Zurich and Empa have chemically modified wood and made it more compressible, turning it into a mini-generator. When compressed, it generates an electrical voltage. Such wood could serve as a biosensor or as a building material that harvests energy.

The technology developed by the ETH spin-off Mithras Technology wouldn’t be out of place in a science fiction movie: the user’s own body heat powers what is known as a thermoelectric generator to charge wearables and other electronic devices.

Data and information, health and medicine, materials and manufacturing, and responsibility and sustainability: these are the main priorities set out in ETH Zurich’s Strategy and Development Plan for 2021–2024.

An ETH Zurich research team is using 3D printing to produce a new type of bioresorbable airway stent. This could greatly simplify the future treatment of upper airway obstruction.

Sustainable high-tech materials are expensive. However, this may soon change. Through his ETH Pioneer Fellowship, Christoph Schneeberger is developing a process that enables more efficient production of fibre-reinforced plastics.

Biodegradable plastics are very much on trend. But there are still very few sustainable alternatives for products containing foamed plastic. ETH Pioneer Fellow Zuzana Sediva is developing a process that could one day be used to make shoe soles and yoga mats from organic waste.

Researchers at ETH have managed to make an efficient material for broadband frequency doubling of light using microspheres made of disordered nanocrystals. The crucial idea for the method arose during a coffee break. In the future, the new approach could be used in lasers and other light technologies.

ETH Zurich researchers have been able to show why biological cells can take on such an astonishing variety of shapes: it has to do with how the number and strength of  local forces acting on the cell membrane from within. This knowledge feeds into the development of better minimal model systems and artificial cells.

Some time ago, ETH researchers developed a filter membrane made out of whey proteins and activated carbon. In a new study, they now demonstrate just how efficient this membrane is at filtering radioactive elements from contaminated water.

The materials scientist, chemist and world-renowned tribologist Nicholas Spencer will be retiring soon. His departure could signal the loss of a specialist discipline within ETH Zurich.

Since the discovery of graphene, two-dimensional materials have been the focus of materials research. Among other things, they could be used to build tiny, high-performance transistors. Researchers at ETH Zurich and EPF Lausanne have now simulated and evaluated one hundred possible materials for this purpose and discovered 13 promising candidates.

Researchers at ETH Zurich have coaxed tiny spheres made of polymer gels into forming complex patterns by themselves through a two-step process. Surfaces with tailor-made optical and mechanical properties could be realized in this way.

Researchers at ETH have provided the first theoretical explanation for how electrical current is conducted in semiconductors made of nanocrystals. In the future, this could lead to the development of new sensors, lasers or LEDs for TV screens.

ETH researchers have developed a new method for producing polymers with different lengths. This paves the way for new classes of polymer materials to be used in previously inconceivable applications.

Computers normally store and process data in separate modules. But now researchers at ETH Zurich and the Paul Scherrer Institute have developed a method that allows logical operations to be performed directly within a memory element.

Researchers at ETH and Empa have shown that tiny objects can be made from silicon that are much more deformable and stronger than previously thought. In this way, sensors in smartphones could be made smaller and more robust.

Right now, the 3D printers at the ETH spin-off Spectroplast are working at full capacity as never before: the young company has started producing silicone attachments for breathing masks on behalf of medical companies.

How is teaching at ETH dealing with the explosion of information in research and technology? Besides developing specialist knowledge, teaching is increasingly concerned with interdisciplinary skills such as critical thinking and the ability to filter, understand and apply relevant information.

Researchers from ETH Zurich and the Swiss Federal Laboratories for Materials Science and Technology (Empa) have set a new world record: they 3D printed complex objects with higher cellulose content than that of any other additively manufactured cellulose-based parts. To achieve this, they used a clever trick.

Researchers at ETH have produced a gel from cellulose fibres and biodegradable nanoparticles that liquifies when pressed through the nozzle of a 3D printer, but then quickly returns to its original shape. Their invention paves the way for personalised biomaterial implants.

A new process simplifies the fabrication of porous materials with a defined nanostructure and takes them one step closer to mass production.

Researchers at ETH have measured the timing of single writing events in a novel magnetic memory device with a resolution of less than 100 picoseconds. Their results are relevant for the next generation of main memories based on magnetism.

In her prior role as Director of Studies, Professor Nicola Spaldin oversaw the comprehensive revision of the curriculum for the bachelor’s degree course in the Department of Materials. In this interview, the ETH professor describes the most important changes and the benefits she hopes they will bring.

ETH scientists have further developed QLED technology for screens. They have produced light sources that for the first time emit high-intensity light in only one direction. This reduces scattering losses, which makes the technology extremely energy efficient.

ETH researchers have created an incredibly lightweight 18-carat gold, using a matrix of plastic in place of metallic alloy elements.

Researchers from ETH Zurich and the National University of Singapore have developed a new kind of bandage that helps blood to clot and doesn’t stick to the wound. This marks the first time that scientists have combined both properties in one material.

Researchers are looking into new materials to lay the foundations for living structures that respond to their environment. They aim to create self-sustaining infrastructures that can monitor their condition and even repair themselves.

ETH researchers are making chocolates shimmer in rainbow colours without the addition of colourants. They have found a way to imprint a special structure on the surface of the chocolate to create a targeted colour effect.

Researchers in Zurich have reproduced Michelangelo’s David as a miniature in metal. Their achievement highlights the potential of a special 3D printing method developed at ETH.

Metamaterials defy conventions, making rigid media flexible, soft materials transmit signals, and sound and light behave in bizarre ways. Metamaterials are engineered to possess properties not found in nature.

ETH researchers used a 3D printing process to produce complex and highly porous glass objects. The basis for this is a special resin that can be cured with UV light.

Researchers at the Paul Scherrer Institute PSI and ETH Zurich have developed a micromachine that can perform different actions. First nanomagnets in the components of the microrobots are magnetically programmed and then the various movements are controlled by magnetic fields. Such machines, which are only a few tens of micrometres across, could be used, for example, in the human body to perform small operations.

Today’s new buildings could easily last until 2050 and beyond. That's why we now need binding climate targets in the construction sector, argues Guillaume Habert. 

ETH researchers have recently been able to monitor the corrosion of bioresorbable magnesium alloys at the nanoscale over a time scale of a few seconds to many hours. This is an important step towards accurately predicting how fast implants are resorbed by the body to enable the development of tailored materials for temporary implant applications.

ETH spinoff FenX transforms industrial waste into a porous foam suitable for building insulation. Unlike other sustainable materials used for the purpose, this type of insulation is non-flammable and inexpensive to produce.

Materials researcher Nicola Spaldin talks in the ETH Podcast about her pioneering work in the research of multiferroic drugs.