Researchers are making jet engines fit for the hydrogen age

Europe is preparing for climate-neutral flight powered by sustainably produced hydrogen. Last year, the EU launched a project to support industry and universities in the development of a hydrogen-powered medium-haul aircraft. Among other things, jet engines will have to be adapted to run on the new fuel. Today's engines are optimised for burning kerosene.

“Hydrogen burns much faster than kerosene, resulting in more compact flames,” explains Nicolas Noiray, Professor in the Department of Mechanical and Process Engineering at ETH Zurich. This has to be taken into account when designing hydrogen engines. Experiments by Noiray’s team now provide an important basis for this. The team has just published its results in the journal external page Combustion and Flame.

One problem is vibrations, which engineers try to minimise. In typical jet engines, about twenty fuel injection nozzles are arranged around the annular combustion chamber of the engine. The turbulent combustion of the fuel there generates sound waves. These waves are reflected back from the walls of the chamber and have a feedback action on the flames. This coupling between the sound wave and the flames could give rise to vibrations that would induce a heavy load on the engine combustion chamber. “These vibrations can fatigue the material, which in the worst case could lead to cracks and damage,” says Abel Faure-Beaulieu, a former postdoctoral researcher in Noiray’s group. “This is why, when new engines are being developed, care is taken to ensure that these vibrations do not occur under operating conditions.”

Simulating conditions at cruising altitude

When engineers developed today’s kerosene engines, they had to get these vibrations under control. They achieved this by optimising the shape of the flames as well as the combustion chamber’s geometry and acoustics. However, the type of fuel has a major impact on the interactions between sound and flame. This means engineers and researchers must now make sure that they will not arise in a new hydrogen engine. An elaborate test and measurement facility at ETH Zurich allows Noiray to measure the acoustics of hydrogen flames and predict potential vibrations. As part of the EU project HYDEA, in which he is involved together with GE Aerospace, he tests hydrogen injection nozzles produced by the company.

“Our facility allows us to replicate the temperature and pressure conditions of an engine at cruising altitude,” Noiray explains. The ETH researchers can also recreate the acoustics of various combustion chambers, enabling a wide range of measurements. “Our study is the first of its kind to measure the acoustic behaviour of hydrogen flames under real flight conditions.”

In their experiments, the researchers used a single nozzle and then modelled the acoustic behaviour of the collection of nozzles as it would be arranged in a future hydrogen engine. The study is helping engineers at GE Aerospace to optimise the injection nozzles and to pave the way for a high performance hydrogen engine. In a few years, the engine should be ready for initial tests on the ground, and in the future, it could propel the first hydrogen fuelled aircrafts.

ETH Professor Noiray does not consider the development of the engines or the development of hydrogen tanks for aircraft to be the greatest challenge in transitioning aviation to the hydrogen age. “Humanity has flown to the moon; engineers will undoubtely be able to develop hydrogen planes,” he says. But planes alone aren’t enough. Another major challenge, Noiray says, is to put in place the entire infrastructure for hydrogen aviation, including producing climate-neutral hydrogen in sufficient quantities and transporting it to airports. Achieving this within a reasonable timeframe requires a concerted effort now.

The project is supported by the Clean Aviation Joint Undertaking (external page CAJU), a public-private partnership between the European Commission and the European aeronautics industry.